Product name: Fireproof strap Product model: FB-01
Product introduction: Flame retardant tape for self-adhesive cables is a new type of fire-resistant and flame-retardant products for power and communication cables. It has many advantages such as good fire retardancy, self-adhesion and maneuverability; and it has many characteristics such as good water resistance, acid, alkali and salinity, non-toxic, odorless, non-polluting and simple construction. When a fire occurs, an oxygen-resistant and fire-resistant carbonized layer can be quickly formed, which can effectively and effectively prevent the extension of the cable. The technical indicators of this product comply with the regulations of GA478-2004 "Flame Retardant Tape for Cables".
Main technical capabilities:
Construction method: 1. Remove dust and dirt from the cable surface before construction.
2. After the plastic film on the surface of the product is peeled off, stretch it slightly, and wind it on the cable surface by 1/2 overlap, and the length of the winding should meet the design requirements.
3. It is used for stretching at the end of the seal. After being wrapped around for a week, it can be firmly bonded by pressing it after cutting or pulling.
4. Select the reference cable diameter for the wide and narrow models of this product. For small diameter and denser cables, it can be wound in bundles.