Welcome to the official website of Ningxia Jindun Fire Protection Technology Co., Ltd.!
Setup as front page Add to favorites Visitor message Affiliated companies
Home page Qualification company news Industry News Products Engineering case Company Profile contact us
Product List
Fire blocking material
Fire Bag (Fire Resistant Bag)
Flexible organic blocking material (fireproof mud)
Inorganic plugging
Fire barrier
Fire Block Module
Fire-resistant coating
Ultra-thin steel structure fireproof coating
Thick steel structure fireproof coating
Tunnel fireproof coating
Thin steel structure fireproof coating
Cable fire coating
Other fire products
Fireproof tape
Firestop
Article body
Indoor thick steel structure fireproof coating
Author: Ningxia Golden Shield Fire Protection Technology Co., Ltd. Source: Site finishing
Release time: 2015-06-13 18:39:33 Publisher: admin
Product technical description:
Type: Powder (water-based)
Color: off-white
Construction method: spraying, smearing
Construction environment: temperature 5-35 ℃; humidity 80% or less; component dew point above 3 ℃
Storage: Above 5 ℃, indoor storage, no exposure to sunlight, rain forest, moisture, and good ventilation
Construction points:
1. Surface treatment of components: oil stains and floating dust should be removed; steel components should be derusted and dewatered to keep the components clean and painted with an anti-rust primer and the primer should be completely dry before construction;
2. This project adopts single-component dry powder paint, mix with water on site, mix the paint and water in the blender according to the mixing ratio specified in the product manual, and stir for 10-20 minutes to form a uniform thick slurry;
3. Bottom layer treatment: Before the construction of the fireproof coating, the component should be brushed at the interface. Use the special primer provided by our factory to match the paint (primer 1: water 4: paint 2-4);
4. Adopt the layered and spaced construction technique. The interval between each two passes shall not be less than 12h. During the construction and within 48h after construction, the ambient temperature shall not be lower than 5 ℃ to prevent frost damage. In extremely dry and hot conditions, the necessary curing conditions should be created to prevent the coating from losing water too quickly.
Please refer to the "Instruction Manual" for the specific construction process
Common construction tools






Effect map






-------------------------------------------------- -------------------------------------------------- -----------------------------------

This article tags: Fireproof coatings, fireproof materials, fireproof coatings for steel structures, fire barriers, flexible organic plugging materials

Editor: [Ningxia Jindun Fire Protection Technology Co., Ltd.] Entry: [Engineering Department]

[ ] [ Back ] [ Print ] [ Close ]

Home | Qualification | Company News | Industry News | Products | Project Cases | | Contact Us
Ningxia Jindun Fire Protection Technology Co., Ltd. ? All rights reserved. Fireproof package (fireproof package). Fireproof mud. Organic fireproof material. Inorganic fireproof material. Inorganic fireproof partition. Cable fireproof coating. Steel structure fireproof coating. Fireproof module. Fireproof Strap. Explosion-proof cement
Jin Dun Fang Huo Co., Ltd. All Rights Reserved Address: Xixia Industrial Park, Yinchuan Economic and Technological Development Zone Telephone: 0951-6119888 Fax: 0951-4083388 Email: Ning ICP prepared 08000319 Ninggong Network Security No.64010402000046 Technical support: Zhida Quartet